Thick sheet blister production is according to the product demand to set the thickness and plate color and so on, still have the pattern of the plate, the quality of a material of the plate, hardness and so on are need and the demand of sucker product is linked. In guangzhou or guangdong region, we can provide the thickness of the blister and the size of the plate is very advantageous, the big size plate blister, the heavy thickness blister processing all has the advanced processing equipment for your service. ABS sheet, PVC sheet, PP board, PE board, PC board, etc., can be processed and produced. Special dimensions can be communicated in advance by telephone. You can customize the pattern, or you can customize the pattern shape that needs to be processed to shape, dark grain, light grain, grass grain, spiral grain, straight grain and so on can produce processing. The color of the blister board can be customized, black board, white board are common blister board, if you have a special color to be custom-made, can be customized in a certain number of circumstances, if the number is small you can be after blister forming spray oil processing into the color you need.

Blister packaging manufacturers processing production, especially product customization production, often a variety of different conditions, mistakes are inevitable. Then, for the blister factory, what is the problem of blister problem that we often say? Most of the problems we often say are the following:

1. If the blister is not in place, it means the shape is deformed and there is no blister product with the same shape as the mold.

2. Over plasticization means that the product is too thin;

3. Pull wire refers to the unnecessary line marks on the molding products;

4. Uneven thickness.

These problems need to be adjusted and put in place after finishing the molds, including the time of advancing of the sheet metal, the temperature and time of heating, the strength and time of vacuumizing, the position of falling of the upper molds, the time and depth of the molds, the placement of the molds in the imposition, and whether accessories are added to the molds.

Blister is often used to make plastic molding production, and plastic to shape, mold is essential to the foundation. What are the commonly used moulds on the market and how are they produced? And for the blister processing of products, how to choose the blister mold will be more suitable for the requirements of customers blister products?

In the manufacturing industry, there are generally four kinds of blister molds: gypsum mold, electroplated copper mold, wood mold and aluminum mold (please refer to the detailed production process of the blister molds).

Gypsum mold: the production and production of the so-called gypsum mold is to carve and shape in the semi-wet state of gypsum, and then the mold is formed after drying. The production cost of gypsum mold is low, because of its small hardness and strong plasticity, so it is easy to modify. But there is an obvious problem, namely the gypsum mold precision is not high enough, the surface is not smooth and brittle not durable, so it is often used to make paradox, to do the type of electroplated copper mold or some of the requirements of low-volume production of blister mold.

Electroplating the copper mold: the production of electroplating the copper mold is relatively simple, it is only compared to the gypsum mold to make the sample on the basis of another layer of copper shell, that is, electroplating the copper mold. As it is manufactured on the basis of gypsum mould, the production cost of gypsum mould is relatively higher than that of gypsum mould, but it is much cheaper than that of aluminum mould. As its surface is clean and durable, low cost advantages, electroplated copper mould is the most commonly used kind of plastic mould.